Telecom Solutions

Telecom Solutions

Military Radios

30-88 MHz band

2320 channels

RF output power 3W/1W/0,1W

Analog and digital transmission

Different accessories: charging unit, headset, antennas, batteries

Allows to create high power mobile unit

RF output power 50W (24V)

RF output power 20W (12V)

Rugged Server

Deployment of IT services in Tactical IP Networks

Fan-less dual core architecture; other cores available to meet specific requirements

Removable hard disk

Wide temperature operating range

Vehicular vibration compatible design

No need for external power protection

Optical Fiber Patch Cord

Personal Soldier Radio

16 radio channels within the 2405 MHz / 2480 MHz

On each channel could work 64 different groups of users

Full duplex operation

Connection to mobile unit intercom system as an access point

Wireless PTT to control radio (dual PTT - option)

Automatic re-transmission

Multi Purpose Break-Out Cable

02~12 fiber, Stranded structure, FRP strength member, 1-fiber sub unit (Φ900μm Tight buffer, Aramid yarn), PVC Jacket, 2.0 mm single cable

Comply with Standard YD/T 1258.2-2003, ICEA-596, GR-409, IEC794, etc; and meet the requirements of UL approval for OFNR and OFNP.Cable Sheath (PVC or LSZH)

Cable Sheath (PVC or LSZH)

2 core: 7.2+ 0.5 mm

4 core: 7.2+ 0.5 mm

6 core: 8.3+ 0.2 mm

8 core: 9.4+ 0.2 mm

10 core: 10.7+ 0.5 mm

12 core: 12.2+ 0.5 mm

Tactical Microwave Link

Tri-Band radio system : Band 1, 3+ & 4 Guaranteed high throughput at long range Up to 34 Mb/s full duplex traffic rate Accepts any combination of traffic inputs

Up to Two Digital Trunk Groups One Ethernet 10/100BaseT interface (IP) Modular Software Architecture radio

Battle proven SCA V2.2 IPV4 and IPV6 SNMP Control

High-capacity Band-4 capable point-to-point radio

Sustained throughput at long range

Innovative RF technology supports Frequency Duplex and Time Duple wave forms

Up to 220 Mbps full duplex in FD mode

Up to 8 Mbps true ECCM in TD mode

SCA Software programmable architecture supports multiple waveform families:

Long Range (up to 64 km)

Automatic self-aligning antenna system

100 BaseT IP interface Modern FECC and interleaving

Extensive BITE, for fast and sure MTTR

1.2 km remoting extension option (with fiber optics and AC/DC converter)

Full mil design

Common platform supports multiple applications and technology insertions

Ftth Drop Cable

Optical Fiber Termination Box

The termination box is wall-mounting type The terminating box body is made of quality metal, the material has excellent mechanical strength.

It is of nice shape and appearance with electro-static spray painting

The terminating box are designed for easy installation, protected the splices and clearly arranged

Fiber optic termination box-3 is equipped with adapter panels. The adapter panel makes it easy to install, inspect and test

Splice trays with heat shrink protective sleeves

Optical Power Composite Cable

Cladding diameter: 125.0±0.1

Fiber characteristics: Diameter: 242±7 um

Tube filling compound(Gel)

PBT loose tube of 2-12 core

Tube thickness: 0.3±0.05 mm Diameter: 2.5±0.1 um

Central Strength Member: steel wire Diameter: 1.6 mm

Cable filling compound

Longitudinal corrugated steel tape laminated with polyethylene on both sides

Corrugated steel Thickness : 0.4 ±0.015

Steel thickness: 0.15±0.015

Black PE out jacket

Wire/Electric Cable

Field Switch

Configurations with up to 60 telephone subscribers and additional interfaces for :

• Radios (with automatic PTT and squelch)

• E&M tie-lines

• ISDN (basic and primary rate interfaces)

• PSTN trunk lines

Rear panel connectivity avoids MDF in light configurations

User-friendly configuration of interfaces, users and other functions at the front panel console

Built-in self test (BITE) for easy and fast diagnostic

Fiber Simplex Indoor Cable

Indoor fiber optical cable is made by evenly applying strands of aramid yarns as the strength member over tight buffer fibers and then is completed with a flame- retardant sheath

1 fiber, Φ900μm Tight buffer fiber, Aramid yarn, PVC Jacket

Characteristics

- Good uniformity of the outer diameter of tight buffer fiber and excellent strip-ability

- Good performance of flame-retardant

- Low induced attenuation within the operating temperature range

- Excellent geometrical dimension of the fiber

Application

- Data communication

- Making connector

- Installation: riser, plenum, etc

- Places where waterproof is not strictly required

- Making jumper, pigtail and building distribution

Standards

- Comply with Standard YD/T 1258.2-2003, ICEA-596, GR-409, IEC794, etc; and meet the requirements of UL approval for OFNR and OFNP

Intercom System

Crew internal and external voice and data communications

Modular digital system

Up to 15 crew members, 4 radios and 4 Ethernet computers

Fully flexible configuration

Quattro Vsat Quick Deploy

1 m antenna

Mount

Ku-Band Modem (optional Ka-Band)

BUC, LNB

Rugged Laptop

FXS and FXO Card

Transport Cases


Quattro Quick Deploy

Transport Cases Including:

1.5KVA Generator

50m RX Cable

50m TX Cable

50 Power Cable

Fiber Duplex Indoor Cable

Field Telephone Set

CB, CBS or LB Operation (up to 12, 20 or 40 km range, respectively)

Pulse or DTMF dialing

Visual signals for incoming, off-hook, low battery and self test situations

Whisper Mode

Protection against high voltages, transient currents and lightning

Designed to meet MIL-STD-810F for humidity, vibration, shock, dust and immersion

Rugged, lightweight and waterproof plastic case

Low weight (less than 1.2 or 1.5 kg, without or with batteries)

Rugged Router/Switch

4 x 10/100/1000 Routed Gigabit ports

4 x 10/100 Fast Ethernet ports

1 x SHDSL 2,3 Mbps port

RIP, RIP V2, OSPF and BGP routing protocols

Firewall, QOS, IPSEC, VPN, NAT and DSCP functionalities

Wide temperature operating range

Vehicular vibration compatible design

No need for external power protection

Multi Purpose Distribution Cable

2~12 fiber, Φ900μm Tight buffer fiber, Aramid yarn, PVC Jacket

Comply with Standard YD/T 1258.2-2003, ICEA-596, GR-409, IEC794, etc; and meet the requirements of UL approval for OFNR and OFNP

Cable Sheath (PVC or LSZH)

- 4 core: 4.8+ 0.2 mm

- 6 core: 5.2+ 0.2 mm

- 8 core: 6.0+ 0.2 mm

- 12 core: 6.6+ 0.2 mm

- 24 core: 8.3+ 0.2 mm

Tight Buffered Fiber

Tight buffer fiber is produced as that fiber is sheathed by buffer material

The selection of top-quality fiber, the specific production equipment and the accurately designed die make the performance of product

Characteristics

· Good uniformity of the outer diameter of tight buffer fiber and excellent strippability

· Good performance of flame-retardant

· Low induced attenuation within the operating temperature range

· Excellent geometrical dimension of the fiber

Application

· Indoor cable

· Making jumper, pigtail

· Data communication

Troposcatte

8 Mb/sec capacity over worst case multi-path

2 GHz and 4.4 to 5 GHz bands

Dual or quad diversity

QPSK modulation

Built-in performance link monitoring

Built-in alarm monitoring

Built-in power control

4 E1's aggregate 8 Mb/sec capacity

Optical Fiber Splice Closure

Features: (vertical type)

- These fiber optic splice closure can be used in underground, aerial, and wall-mounting applications

- The open box is made from the high-quality and with the mechanical sealing structure filled with silicon gum material

Features: (up-down bisection type)

- These fiber optic splice closure can be used in underground, aerial and wall-mounting applications

- The open typed box is made from the high-quality pc and with the mechanical sealing structure filled with the sealing materials

- Besides, the external component and fastening piece are all made from the high-quality stainless steel